Yes. ANKR-POINT™ is designed to work with most compound bow brands and sizes. It secures at the grip so you don’t need attachments, straps, or modifications to your bow.

Yes. ANKR-POINT™ is designed to accommodate a wide range of grip sizes and shapes found on most compound bows. The grip-contact pads and adjustment screw let you fine-tune the hold, ensuring a secure, stable fit without modifying your bow. Some Older Bows, or bows with a really wide grip may not work. However we are working on a permanent solution for all bows.

In most cases, yes. If you have accessories that hang or protrude around the grip area, confirm they don’t interfere with the grip retention point. If you’re unsure, send a photo of your setup to support and we’ll advise.

ANKR-POINT™ is built to attach to the headrest in cars, SUVs, and trucks. Many customers also use it in off-road rigs.

The install takes just a few minutes. You don’t need to modify your bow, and installation is designed to be straightforward with included hardware.

No drilling is required.

Yes. Many customers run a primary install in one vehicle and purchase an additional ANKR-POINT™ for other vehicles. If you don’t switch vehicles often, you can still move it from one to another in a matter of minutes.

ANKR-POINT™ attaches to the back of your headrest. Many passengers sitting in the rear seat have no problem sitting behind it, as it’s elevated and off of the floor.

Yes. ANKR-POINT™ was designed to reduce movement and keep your bow stable on rough roads and trails when installed on a solid mounting point.

No. ANKR-POINT™ secures the bow by the grip—avoiding limbs and cams—helping prevent sway, swing, and contact that can cause scratches or impact damage while driving.

That’s one of the main advantages of grip-based retention: it keeps your bow stable without suspending it by limbs or contacting cams and strings.

Many customers do. As with any gear, avoid leaving equipment visible in high-risk areas, and confirm the bow is secured before travel.

Yes. ANKR-POINT™ includes a wall adapter so you can securely store your bow at home when you’re not on the road.

Yes. Mount it to a stud or a properly anchored surface anywhere inside your home.

ANKR-POINT™ Bow Retention System includes vehicle mounting hardware, and a wall adapter for home storage.

ANKR-POINT™ is made from carbon fiber–reinforced plastic, which provides exceptional strength and excellent resistance to the temperature extremes that can occur inside vehicles.

Traditional hooks often hang bows by limbs or rely on gravity, which can allow movement. ANKR-POINT™ locks at the grip to reduce sway, swing, and bounce during travel.

ANKR-POINT™ is patent pending. We’re protecting the grip-based retention design that keeps your bow stable in transit.

ANKR-POINT™ is designed, engineered, and manufactured in America.

It’s built for real-world vehicle conditions—vibration, bumps, and temperature swings. Always confirm your mounting point remains tight over time, especially after long rough-road trips.

Standard Orders are processed after payment is completed and typically ship within a few days. Shipping times can vary by location and order volume. Once shipped, you’ll receive tracking details by email. 

Yes. International shipping is charged at standard rates at checkout and is not free. Your destination country may also assess customs and duty fees.

Possibly. Customers are responsible for any customs or duty fees assessed once the shipment arrives in the destination country. These charges aren’t included in shipping costs at checkout.

If you’re not satisfied, contact us and we’ll make it right. Include your order number and a quick note about your vehicle and bow setup so we can help faster.

We stand behind ANKR-POINT™. If you have a warranty question or a part issue, contact support with your order number and photos if relevant.

Yes. Send us a photo of your vehicle setup (rear seating area) and tell us your vehicle year/make/model. We'll be happy to help with recommendations. Also feel free to check out our How it works page, which will guide you through the installation process.

Send us an email at FLXFACTORYUSA@gmail.com. For fastest help, please include your order number, vehicle, bow brand/model, and a photo of your intended mounting area.